Event production · UK & Europe +44 (0)7585 607719 info@blackfx.co.uk
Mac appMade by Black FX

StagePlan for Mac.

StagePlan is a Mac app for drawing stage plans for theatre, gigs and events. Lighting, sound, staging, bars and trusses, power and people go on the plan at their real sizes and heights. It’s free to use, and a licence unlocks the extra features.

Coming soon Screenshots
The app

Screenshots

The demo plan: a lighthouse set with a patched rig on its bars, sound, foldback, power, actors’ spike marks and the prompt desk.

StagePlan's main window: the kit library on the left, the stage plan in the middle with the FOH bridge, LX bars, booms and cyc, numbered channel bubbles and DMX addresses, the set, sound and power, and the inspector on the right showing a moving head hung on LX2
The plan view. Drag kit from the library on the left; the inspector on the right shows the selected fixture, here a moving head hung on LX2. The show was made up for these screenshots.
What it does

Features

Lighting

Profiles, fresnels, PCs, pars, washes, spots and beams, each with its channel, universe and address, mode, colour, wattage and purpose. The channel hookup is listed beside the plan.

Bars and trusses

Fixtures, flown PA, screens and borders dropped on a bar hang from it at its trim height. Move or rotate a bar and everything on it goes too.

Sound

Mains, flown and ground-stacked line arrays, subs, foldback, mics and stands, backline and stage boxes, with an input list made from what’s on the plan.

Staging and the auditorium

Stage, apron, wings, proscenium and safety curtain to real sizes, with risers, flats, cloths and spike marks. Seating blocks with seat counts, wheelchair spaces, the pit and exits.

Layers

Show, lock or dim each department, or layers of your own. Lock the bars so they can’t move, or dim them so the fixtures stand out.

Fixture info on the plan

A channel bubble on every fixture, plus any of universe and address, make, mode, colour, purpose and label. Addresses can be written four ways, such as 1.001 or 1-001.

Batch edit

Set the mode, universe, colour or purpose of many fixtures at once, and number channels and patch addresses in order.

My Kit

Save your own fixtures and kit, with make, mode, size, watts and weight, to the library for every plan.

Power and loads

Power per phase against your supply, the outlets and what they feed, data lines, and the load on every bar, truss and hoist. Needs a licence.

Section view

The stage from the side: bar trims, borders, the proscenium and the front row’s sightline to the back wall. Needs a licence.

Lighting desks

Import a patch from ChamSys MagicQ with fixture types, gels and positions, and export one back. Vectorworks and WYSIWYG lists import too. Needs a licence.

CAD export

DXF plans in millimetres, with a layer for each department, for SketchUp, AutoCAD and Vectorworks. Needs a licence.

Print and PDF

A4 to A1, Letter or Tabloid, at a standard scale or fitted to the page, with your venue or tour logo. Paperwork pages for the hookup, inputs, equipment and power.

Templates and a demo

Start from an empty box stage, a theatre, a band stage or a conference set, or open the demo plan to see a finished one.

Metric or imperial

Type lengths as 2.44, 2440mm or 8′ 6″. Dark or light look, and updates built in, like ScriptPlan.

Free and licensed

What a licence adds

You’ll be able to download StagePlan and use it for free. A licence key, made for your email address, unlocks the rest.

Want to try StagePlan? You can apply for a free evaluation licence. It unlocks everything, and StagePlan shows EVAL so you know it’s an evaluation copy.

Apply for an evaluation licence

Free

  • Full stage plans with lighting, sound, staging and set
  • Up to 20 fixtures on a plan
  • Hookup, input and equipment lists
  • PDFs, PNGs and prints, which carry a StagePlan Free mark

With a licence

  • CAD export: DXF plans for SketchUp, AutoCAD and Vectorworks
  • Lighting desk import and export, starting with ChamSys MagicQ
  • PDFs and printing without the free mark
  • Power and loads, and the section view
  • Unlimited fixtures
  • Use it on up to 2 of your Macs

Check your licence

StagePlan's Licence window in the free version: up to 20 fixtures on a plan, what a licence unlocks, online activation with an email address and licence key, and a licence file for a Mac without internet
From the side

Section view

Every item on the plan has its height, so you can see the stage from the side as well as from above.

  • Bars at their trims, with the fixtures hanging from them
  • Borders, the proscenium and the grid
  • The front row’s sightline under the lowest border to the back wall
StagePlan's section view on the centre line: the grid at 8 m, the proscenium, the FOH bridge and LX bars at their trims, borders, scenery heights, performers and the front row's sightline to the back wall, with the layers panel on the right
Before the get-in

Power and loads

StagePlan adds up the power and weight of everything on the plan, so you can check them before anything is rigged.

  • Power on each phase against your supply, with Balance Phases
  • Power outlets from 125 A three-phase to 13 A, and what each one feeds
  • Data lines and where they go
  • The load on every bar, truss and hoist against its safe working load
  • A warning when anything is over 80% of its rating
StagePlan's Power and Loads page: three phases evenly balanced against a 63 A three-phase supply, three power outlets and what they feed, 12 data lines to the control position, and each bar's load against its safe working load
Paperwork

Lists

The channel hookup, input list and equipment list are made from what’s on the plan, so they always match it.

  • Channel, fixture, position, address, mode, colour and purpose
  • Inputs with their source, mic or DI, and stand
  • Equipment quantities by department
  • Select a row to find it on the plan
  • Export as CSV, or print as part of the PDF
The channel hookup for the demo plan: 32 fixtures with channel, type, position, universe and address, mode, colour and purpose
The input list: each input with its source, mic or DI, and stand
The equipment list: quantities of each item by department
Lighting desks

ChamSys MagicQ

Bring the patch in from the desk, and send it back. More desks will follow.

  • See every fixture with the symbol it will get before you import
  • Update fixtures already on the plan, and add the rest
  • Place them at the positions in the file, and hang them on the nearest bar
  • Export a head list with positions for MagicVis
  • One Undo takes the whole import back
The Import Lighting sheet over the plan: 14 fixtures from a ChamSys MagicQ head list with their type, name, patch, gel and position, and options to update, add, place and hang them
Output

Print and PDF

Paper view shows the plan as it will print. The PDF puts it at the largest standard scale that fits, with a scale bar, symbol key and title block.

  • A4 to A1, Letter or Tabloid
  • Scales from 1:25 to 1:200, or fit to the page
  • Black FX branded, or light for printing, with your venue or tour logo
  • Portrait paperwork pages: hookup, inputs, equipment, and power and loads
  • PNG images and CSV lists too
Page 1 of the A3 PDF: the demo plan at 1:75 with a scale bar, a symbol key and the title block with show, venue, drawn by, date, revision and scale
Paper view: the plan as it prints, inside the app
A portrait paperwork page from the PDF: the channel hookup
Uses

Who it’s for

Theatre

Lighting plans, ground plans and the hookup for plays, pantos and musicals.

Bands and gigs

A stage plot with backline, monitors and an input list to send to the venue.

Conferences and events

Lecterns, screens, staging, seating and the rig, laid out for the client and the crew.

Lighting designers

Patch on the desk, plan in StagePlan, and keep the two in step.

Production managers

Check loads, power and sightlines before anything is rigged.

Touring

Send venues a PDF, or a DXF they can drop into their own drawings.

AvailableSoon

Version 1.0, coming soon. It will be free to download and use, and a licence will unlock CAD export, lighting desks, clean PDFs and printing, power and loads, the section view and unlimited fixtures on up to 2 Macs.

Needs macOS 14 (Sonoma) or newer, on an Apple silicon or Intel Mac.

Ask about StagePlan
Changes

Version history

StagePlan will check for updates and offer each new version when it’s out. Each one will be listed here.

Version 1.0

First release Coming soon

In the first release

  • Stage plans to real sizes and heights, from an empty box stage, theatre, band or conference template, or the demo plan.
  • Lighting with channels, addresses, modes and colours, on bars and trusses at their trims, with batch edit and auto-patch.
  • Sound, backline, staging, set, the auditorium, power, data and people.
  • Layers to show, lock and dim, and My Kit for your own fixtures.
  • Hookup, input and equipment lists.
  • Power and loads, and the section view.
  • ChamSys MagicQ import and export.

Exports

  • PDFs from A4 to A1, Letter and Tabloid, with paperwork pages.
  • PNG images.
  • DXF plans for SketchUp, AutoCAD and Vectorworks.
  • CSV lists.

Got an event coming up?

Get in touch
Call Get a quote